LabGruppen PLM10000Q

Beskrivelse

Säljer 2 st fina förstärkare! Priset är per styck!

Specifications PLM 10000Q
Number of input channels 2
Number of output channels 4
Peak total output all channels driven Max. Peak output voltage per channel Max. output current per channel 10800 W
153 V
49 A peak
Max. Output Power 2 ohms 4 ohms 8 ohms 16 ohms
All channels driven 2350 W 1) 2300 W 1) 1300 W 660 W
All channels driven into optimal impedance interval > 2700 W into 2.4 – 3.2 ohms
8 ohms bridged per ch. 4600 W
4 ohms bridged per ch. 4700 W
Bridged into optimal impedance interval >5400 W into 4.8 – 6.2 ohms
Audio Performance
THD + N 20 Hz - 20 kHz for 1 W THD + N at 1 kHz and 1 dB below clipping Dynamic range with digital inputs (for all supported sample rates) Dynamic range with analog inputs Frequency response (1 W into 8 ohms, 20 Hz - 20 kHz) Common Mode Rejection (CMR) Internal sample rate 96 k
Internal data path Product propagation delay, best case (96 kHz AES) Product propagation delay, analog input < 0.05%
< 0.04%
> 116 dB
> 112 dB
+ /-0.05 dB
> 74 dB, 20 Hz to 20 kHz
32 bit floating point
1.61 ms
1.68 ms
Sample Rate Converters
THD + Noise 0.00003 %, 20 Hz - 20 kHz, unweighted
Analog to Digital inputs
Inputs Input sensitivity range THD + Noise 2 inputs x 2 link
+12 or +26 dBu
0.00022 %, typical at 1 kHz unweighted at +26 dBu headroom setting
0.00033 %, typical at 20 Hz and 20 kHz unweighted at +26 dBu headroom setting
AES / EBU inputs
Inputs Supported resolutions ≤ 24 bit
Supported sample rates 2 inputs x 2 link
44.1, 48, 88.2, 96, 176.4, 192 kHz
Dante Audio Network
Inputs and outputs Supported sample rates Supports redundant paths Yes
Flexible topology Yes
Network latency 2 inputs, 2 outputs
48, 96 kHz
0.8, 1.3 and 4 ms
Device presets
Local memory locations for the settings of the product 100
Limiters
Adjustable Inter-Sample Voltage Peak Limiter (ISVPL) Current Peak Limiter < 300 ms Current Average Limiter (CAL) > 300 ms LimiterMax (rms and peak limiters)
– MaxRMS (rms voltage limiter) – MaxPeak (peak voltage limiter) 17.8 - 153 V, step size 0.1 V
49 A peak
25 Arms
Yes
Yes
Gain
Amplifier gain Analog attenuator 22 - 44 dB, step size 0.1 dB
-Inf to 0 dB, step size 0.25 dB
Rear-panel interface
AES / EBU / I/O (input + link) Analog, 2-channel I/O (input + link) Output connectors Auto 10/100, Auto Uplink Control and monitoring interface Detachable mains cord Cooling 2 x 3-pin XLR
4 x 3-pin XLR, electronically balanced
Neutrik speakON (1 x NLT8, 2 x NLT4) or 4 Binding Posts (pairs)
2 x RJ45 etherCON
Via Ethernet for Lake Controller software, or DLM (the 3rd Party Protocol)
Neutrik powerCON 32 A
Two fans front-to-rear airflow, temperature controlled speed
Front-panel user interface:
Display Fault/Warning/Limit/Clip indicators Mute and soft function buttons Standby Power button On/Standby
Mute Enable button Meter button Menu button Rotary Encoder Yes
Exit button 2.5 inch, daylight readable LCD
RGB LEDs and detailed fault description on display
8 provided
Enables muting of outputs and inputs via soft-button keypad
Toggles through meter views
Provides a menu driven interface for full function front panel control
Provides a “back” function
Power
Operating voltage (45 - 66 Hz) Universal power supply 140 - 265 V / 70-135 V 2)
Soft start / Inrush Current Draw Yes / max. 5 A
Power Average Limiter (PAL) Yes
Power Factor Correction (PFC) No
Breaker Emulation Limiter (BEL), software controlled 5 - 32 A No
Under-Voltage Limiter (UVL) No
Dimensions
Rack rail to rear panel Overall depth including handles and rear support W: 483 mm (19”), H:88 mm (2 U), D: 386 mm (15.2”)
460 mm (18.1”)
Weight 13.5 kg (30 lbs)