Passiv full-range högtalare för tak/väggmontage,

12\\\" baselement, 45 Hz - 25 kHz, 22kg



Finns i centrala Uppsala



Info för de hängivna ljudnördarna, taget från nätet:



The Electro-Voice EVI-12 full-range loudspeaker is

a factory assembled system featuring a small-

format

Vari Intense® horn and a 12-inch direct radiator in

a vented enclosure. The EVI-12 is intended to be

used as a stand-alone full-range system, but may

also be used as the mid-bass/high-frequency

component in most multi-way loudspeaker

systems.



The EVI-12 consists of a proprietary castframe

305-mm (12-in.) high-power, longexcursion low-

frequency driver mounted within a vented chamber

of 2.5 cubic feet, optimally tuned to provide

unequalized lowfrequency response to below 45

Hz. The high-frequency complement consists of a

25.4-mm (1.0-in.) exit compression driver utilizing

a new small-format Vari Intense® horn. Vari

Intense® is a revolutionary patented technology

that throws a 6-to 10-dB hotter signal to the back

of the room. This compensates for the drop in SPL

over the longer distance to the back of the room

(25 feet for the short throw and about 70 feet for

the long throw in a typical room). This single horn

replaces a short-throw/longthrow horn

combination, reducing the material and labor costs

of an installation. Electrical connections to the

system are made by large screw terminals able to

accept up to 12-gauge wire, mounted to an input

panel on the back of the enclosure. The system is

provided with a 2,000-Hz passive crossover

featuring self-setting tweeter protection and

asymetric acoustic slopes with passive lobe

steering for uniform coverage throughout the

crossover region. The enclosure is constructed

from 19-mm (0.75-in.) thick, thoroughly braced 7-

ply birch plywood lined with sound-absorbent glass

wool. Five 3/8-16 shoulder-bolt hanging points are

provided for safe suspension of the EVI-12. There

are two hanging options recommended. The

optional U-Bracket hanging kit, MB-EVI12 is

available for use with the 3/8-16 T-nut locations on

the side of the enclosure along with a single pull-up

strap located on the lower back of the enclosure.

The second option is available using the two T-nut

locations on the front top of the enclosure as well

as the pull-up location on the lower back of the

enclosure. The EBK-1 kit of three forged shoulder

eyebolts is available if structurally rated 3/8-16

eyebolts are not locally available. The system may

then be hung individually or in an array.



• Ground-breaking advance in singlebox utility



• New small-format Vari Intense® 6 horn



• 1\\\" exit titanium compression driver



• 12\\\" cast-frame woofer



• 1000W peak, 250W long-term power capacity



• Terminal strip inputs for secure lead connections



• Compact, lightweight, refinishable, easy-to-install

enclosure



• Available in white or black finish